Part Number Hot Search : 
SDN520C NSSW203T N5402 L780S20 13N03 NCASC1 PMP4201G M65608E
Product Description
Full Text Search
 

To Download AS216-339 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 GaAs SPDT IC 7 W T/R Switch DC-2.5 GHz
AS216-339 Features
T/R Switch High Isolation (30 dB @ 0.9 GHz) Designed for Mobile Radio Applications P-1 dB = 10 W @ 0.9 GHz, 25C High Intercept Point (IP3 +63 dBm,@ 0.9 GHz)
SOIC-8 Exposed Paddle
PIN 1 INDICATOR 0.194 (4.93 mm) + 0.002 (0.05 mm) - 0.005 (0.13 mm) 0.155 (3.94 mm) + 0.002 (0.05 mm) - 0.005 (0.13 mm) 0.016 (0.41 mm) + 0.0032 (0.080 mm) - 0.080 (0.060 mm) 0.078 (1.98 mm)
Description
The AS216-339 is a high power IC FET SPDT switch in a plastic SOIC-8 exposed paddle package. This switch has been designed for use where extremely high linearity is required. It can be controlled with positive, negative or a combination of both voltages. Some standard implementations include antenna changeover, T/R and diversity switching over 2 W. This switch can be used in many analog and digital wireless communication systems including cellular, GSM and PCS applications.
0.061 (1.55 mm) 0.005 (0.13 mm) 0.097 (2.46 mm) 0.050 0.003 (0.08 mm) (1.27 mm) 0.002 (0.05 mm) BSC
EXPOSED PAD 0.090 (2.29 mm)
0.090 (2.29 mm) 0.236 (5.99 mm) + 0.008 (0.21 mm) - 0.006 (0.15 mm)
Electrical Specifications at 25C (0, -5 V)
Parameter1 Insertion Loss3 Frequency2 DC-0.5 GHz DC-1.0 GHz DC-2.5 GHz DC-0.5 GHz DC-1.0 GHz DC-2.5 GHz DC-1.0 GHz DC-2.5 GHz 32 27 19 Min. Typ. 0.7 0.8 1.0 34 28 20 1.2:1 1.5:1 1.4:1 1.7:1 Max. 0.8 0.9 1.1 Unit dB dB dB dB dB dB dB dB
Isolation
VSWR4
Operating Characteristics at 25C (0, -5 V)
Parameter Switching Characteristics5 Condition Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru 5V 10 V For Two-tone Input Power +13 dBm IP3 0.9 GHz 0.9 GHz 0.9 GHz Frequency Min. Typ. 6 12 30 +35 +40 +63 Max. Unit ns ns mV dBm dBm dBm
Input Power for 1 dB Compression Intermodulation Intercept Point Control Voltages
VLow = -12.0 V VLow 0 V, 500 A Max. VHigh = 0 V VHigh +12.0 V, 500 A Max. Differential = + 5.0 V (VHigh - VLow) < +12.0 V
1. All measurements made in a 50 system, unless otherwise specified. 2. DC = 300 kHz. 3. Insertion loss changes by 0.003 dB/C. 4. Insertion loss state. 5. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com
Specifications subject to change without notice. 12/02A
1
GaAs SPDT IC 7 W T/R Switch DC-2.5 GHz
AS216-339
Typical Performance Data (0, -5 V)
-0.1 -0.3 -0.5 J3 0 -5 -10 -15 -20 J3 J2
dB
-0.7
dB
3.5 4.0
-0.9 -1.1 -1.3 -1.5 0 0.5 1.0 1.5 2.0 2.5
J2
-25 -30 -35 -40 -45 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
3.0
4.0
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Typical Insertion Loss vs. Frequency
12
0 -5 -10 -15 -20
Max. Input Power (W)
10 PIN (W) 8 6 4 2 0
(dB)
-25 -30 -35 -40 -45 -50 0 0.5 1.0 1.5 2.0
J2
J3
2.5
3.0
3.5
4.0
0
20
40
60
80
100 120 140 160
Frequency (GHz)
Heat Sink Temperature (C)
Typical Return Loss vs. Frequency
0 -0.2 -0.4
Temperature Derating Curve (0, +10)
Absolute Maximum Ratings
Characteristic 10 V 5V RF Input Power Control Voltage Operating Temperature Storage Temperature JC Value 8 W > 0.9 GHz, 0, -12 V (VHigh - VLow) < 12 V -40C to +85C -65C to +150C 45C/W
Insertion Loss (dB)
-0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0
20 22 24 26 28 30 32 34 36 38 40
Input Power (dBm)
Compression at 900 MHz 25C
2
Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com
Specifications subject to change without notice. 12/02A
GaAs SPDT IC 7 W T/R Switch DC-2.5 GHz
AS216-339
Truth Table
V1 VLow VHigh V2 VHigh VLow J1-J2 Insertion Loss Isolation J1-J3 Isolation Insertion Loss
Pin Out
J1 CBL GND J2 CBL V2 GND
1 2
8 7
VLow = 0 to -12.0 V. VHigh = 0 to +12.0 V. Differential = +5.0 V (VHigh - VLow) < +12.0 V. Refer to Application Notes for further information on differential voltage operation.
CBL GND
J3
External DC blocking capacitors (CBL) are required only if VHigh > 0.0 V. CBL = 100 pF for operation >500 MHz.
Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com
Specifications subject to change without notice. 12/02A
3 4
6 5
V1
3


▲Up To Search▲   

 
Price & Availability of AS216-339

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X